Questions LLC
Login
or
Sign Up
Ask a New Question
Questions
Science
How far should you push the long end of a lever to make the short end move 17cm?
1 answer
34cm
You can
ask a new question
or
answer this question
.
Related Questions
A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m.
Forces 10N and 50N are to be balance at the end of 1m long lever.Where should be the position of fulcrum?
A certain lever system is only 30% efficient. What could make it more efficient?
Make a longer lever that will require less
a uniform wooden beam 10 m long ang weighting 200 N is used to support a load of 300 N on the left end , and 500 N on the right
A shovel performs several different functions. One of these is that it gives mechanical advantage as a lever. When does it act
A pole 25m long is placed against a vertical wall such that its lower end is 7m from the foot of the wall on the same horizontal
A shovel performs several different functions. One of these is that it gives mechanical advantage as a lever. When does it act
Using a lever, a person applies 60 N of force and moves the lever 1 m. This moves a 200 N rock at the other end by 0.2 m. What
A simple lever is used to lift a heavy load. When a 60-N force pushes one end of the lever down 1.2 m, the load rises 0.2 m.
How much force must be exerted at the right end to pick up the lever and load if it pivots at the left end? The 2.00 meter long