Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
A freight elevator has a mass of 240 kg. Find the tension in the cables (to the nearest whole number) when it ascends with an acceleration of 4 m/s2.
1 answer
tension= m(g+a)
You can
ask a new question
or
answer this question
.
Related Questions
A tension of 6000 newtons is experienced by the elevator cable of an elevator moving upward with an acceleration of 2m/s^2. what
In a repair shop a truck engine that has mass 429 kg is held in place by four light cables (Figure 1) . Cable A is horizontal,
An elevator, with a total mass of 454 kg, accelerates downward at 3.51 m/s2. During this time, the tension in the elevator cable
Two blocks are fastened to the ceiling of an elevator as in Figure P4.19. The elevator accelerates upward at 2.00 m/s2. The
a 20 kg loudspeaker is suspended 2m below a ceiling by two 3m-long cables that angle outward at equal angles. what is the
A loaded elevator with very worn cables has a total mass of 2200kg, and the cables can withstand a maximum tension 28 000N a)
An elevator weighing 2.00*10^5 N is supported by a steel cable. What is the tension in the cable when the elevator is
An elevator in a tall building is allowed to reach a maximum speed of 3.3 m/s going down. What must the tension be in the cable
An elevator in a tall building is allowed to reach a maximum speed of 3.61 m/s going down. What must the tension be in the cable
A lamp hangs vertically from a cord in a descending elevator that declerates at 2.4m/s^2 a) if the tension in the cord is 89N
