here is a scale of a window frame that uses a scale of 1 cm to 6 inches
create another scale drawing of the window frame that uses a scale of 1 to 12 inches
To create another scale drawing of the window frame using a scale of 1:12, we will need to convert the measurements from the given scale of 1 cm to 6 inches to the new scale.
Given:
Scale: 1 cm to 6 inches
New Scale: 1:12 inches
To convert the measurements, we will first determine the conversion factor between the two scales.
Conversion factor = (1 cm / 6 inches) * 12 inches
Conversion factor = 2 cm / 1 inch
Now, we can convert the measurements from the original scale to the new scale:
1 cm = 1/2 inch
2 cm = 1 inch
3 cm = 1 1/2 inches
4 cm = 2 inches
5 cm = 2 1/2 inches
6 cm = 3 inches
Using the new scale of 1:12 inches, we can create the scale drawing of the window frame accordingly.
create another scale drawing of the window frame that uses a scale of 1 to 12 inches
To create a scale drawing of the window frame using a scale of 1:12 inches, we will need to convert the measurements from the given scale of 1 cm to 6 inches to the new scale.
Given:
Scale: 1 cm to 6 inches
New Scale: 1:12 inches
To convert the measurements, we will first determine the conversion factor between the two scales.
Conversion factor = 6 inches / 1 cm
Conversion factor = 6 inches
Now, we can convert the measurements from the original scale to the new scale:
1 cm = 6 inches
2 cm = 12 inches
3 cm = 18 inches
4 cm = 24 inches
5 cm = 30 inches
6 cm = 36 inches
Using the new scale of 1:12 inches, we can create the scale drawing of the window frame accordingly.
so what is the answer
Apologies for the confusion. Here is the scale drawing of the window frame using a scale of 1:12 inches:
1 cm = 6 inches
2 cm = 12 inches
3 cm = 18 inches
4 cm = 24 inches
5 cm = 30 inches
6 cm = 36 inches
Please keep in mind that these measurements are proportional to the actual size of the window frame and should be used for scale representation only.
To create a scale drawing of the window frame using a scale of 1 to 12 inches, follow these steps:
1. Determine the length of the window frame in inches. Let's say the length is 48 inches.
2. Calculate the length on the new scale. Divide the actual length by the scale ratio (12) to get the new length: 48 inches ÷ 12 = 4 inches.
3. Determine the width of the window frame in inches. Let's say the width is 36 inches.
4. Calculate the width on the new scale. Divide the actual width by the scale ratio (12) to get the new width: 36 inches ÷ 12 = 3 inches.
5. Using graph paper or a drawing software, draw a rectangle that represents the window frame. Label it with the dimensions of 4 inches by 3 inches.
6. If there are any other details or features on the window frame, such as panes or mullions, use the same scale ratio to draw them accurately.
Remember to use a ruler or measuring tool to ensure accurate proportions while drawing the window frame on the new scale.
To create another scale drawing of the window frame using a scale of 1 to 12 inches, we need to convert the given scale of 1 cm to 6 inches into the new scale.
First, let's convert the given scale from centimeters to inches:
1 cm = 6 inches
To convert from centimeters to inches, we use the conversion factor that 1 inch is equal to 2.54 centimeters.
So, 1 cm = 1/2.54 inches = 0.3937 inches (approximately).
Now, let's convert the given scale of 1 cm to 6 inches to the new scale of 1 to 12 inches:
0.3937 inches is equivalent to 6 inches in the current scale.
We need to find the equivalent measurement in the new scale.
Let 'x' represent the measurement in inches in the new scale.
So, we can set up a proportion:
0.3937 inches / 6 inches = x / 12 inches
Solving for 'x', we can cross-multiply and get:
0.3937 inches * 12 inches = 6 inches * 'x'
4.7244 inches = 6 inches * 'x'
Dividing both sides by 6 inches:
4.7244 inches / 6 inches = 'x'
0.7874 inches = 'x'
Therefore, in the new scale of 1 to 12 inches, the measurement equivalent to 1 cm is 0.7874 inches.
Now, to create the scale drawing of the window frame using the new scale, you can measure the dimensions of the window frame in inches and multiply each measurement by 0.7874.
For example, if the width of the window frame is 24 inches in the new scale:
Width in centimeters = 24 inches * 0.7874 = 18.8985 inches (approximately).
Repeat this process for all dimensions of the window frame, and use these measurements to create the scale drawing with the new scale of 1 to 12 inches.