Use the table to answer the question.
x y
−6 5
−4 2
−2 −1
Graph the points in the coordinate plane from the data values in the table.(1 point)
The points in the coordinate plane from the data values in the table are:
(-6, 5)
(-4, 2)
(-2, -1)
To graph the points in the coordinate plane from the data values in the table, follow these steps:
1. Draw the x-axis and y-axis on a piece of graph paper.
2. Label the x-axis with the numbers from the x column of the table: -6, -4, -2.
3. Label the y-axis with the numbers from the y column of the table: 5, 2, -1.
4. Plot each point on the graph by finding its corresponding x and y values.
- For the first point (-6, 5), locate -6 on the x-axis and go up to 5 on the y-axis. Place a dot at the intersection of these two values.
- For the second point (-4, 2), locate -4 on the x-axis and go up to 2 on the y-axis. Place a dot at the intersection of these two values.
- For the third point (-2, -1), locate -2 on the x-axis and go down to -1 on the y-axis. Place a dot at the intersection of these two values.
5. Connect the dots with a straight line to represent the graph of the points.
Your completed graph should show the points (-6, 5), (-4, 2), and (-2, -1) connected by a line.
To graph the points in the coordinate plane using the given table, we need to plot the values of x and y as coordinates. Here's how you can do it:
1. Set up a coordinate plane: Draw two perpendicular lines intersecting at point (0, 0). The horizontal line is the x-axis, and the vertical line is the y-axis.
2. Plot the first point: Look at the first row in the table: x = -6 and y = 5. Find -6 on the x-axis and go up 5 units on the y-axis. Mark this point as (-6, 5).
3. Plot the second point: Look at the second row in the table: x = -4 and y = 2. Find -4 on the x-axis and go up 2 units on the y-axis. Mark this point as (-4, 2).
4. Plot the third point: Look at the third row in the table: x = -2 and y = -1. Find -2 on the x-axis and go down 1 unit on the y-axis. Mark this point as (-2, -1).
5. Connect the points: Once you have plotted all the points, connect them with a straight line. This line represents the pattern or relationship between the x and y values in the table.
That's it! You have now graphed the points in the coordinate plane using the given table.