Questions LLC
Login
or
Sign Up
Ask a New Question
Electronics/Digital Signal Processing
Direct Digital Synthesis (DDS)
Frequency Tuning
For a DDS system with 32-bit phase accumulator and 100 kHz clock frequency determine the value of frequency tuning code M to generate output signal with the frequency of 10 Hz.
1 answer
M = (2^32) * (10 Hz / 100 kHz) = 6.5536e+7
You can
ask a new question
or
answer this question
.
Related Questions
Q11
a(ii)A sinusoidal carrier wave has frequency 500 kHz and amplitude 6.0 V. It is to be frequency modulated by a sinusoidal
A cardiologist uses an ultrasound scanner with an operating frequency of 3.5 MHz that can detect Doppler frequency shifts as
TIM7 is used to generate time base interrupts to implement the DDS clock frequency of 100 kHz. Determine the values of TIM7 ARR
The pendulum on a cuckoo clock is 5.00 cm long. (a) Determine the period of this pendulum. (b) What is its frequency?
The following signal is sampled by 12-bit ADC triggered by timer TIM7. The timer clock frequency is 80 MHz. The value of
An analog signal is sampled by 12-bit ADC triggered by timer TIM7. The timer clock frequency is 80 MHz. The value of TIM7_PSC
Determine the values of timer TIM7 prescaler (PSC) and autoreload (ARR) registers so set timer overflow period to 100 ms, if
A bat flying at 5.5 m/s emits a chirp at 35 kHz. If this sound pulse is reflected by a wall, what is the frequency of the echo
The following signal is sampled by an ADC triggered by timer TIM6. The timer clock frequency is 80 MHz. The value of TIM6_PSC
1. A whistle you use to call your hunting dog has a frequency of 21 kHz, but your dog is ignoring it. You suspect the whistle
