Questions LLC
Login
or
Sign Up
Ask a New Question
Math
Measurement
How to measure barrel length on lever action?
1 answer
To measure the barrel length on a lever action rifle, you will need to measure from the end of the barrel to the end of the chamber. This measurement should be taken from the outside of the barrel and not from the inside.
You can
ask a new question
or
answer this question
.
Related Questions
An open (hollow) cylindrical barrel has a base radius 14 cm and a height of 33cm
A) find the volume and the surface area of the
a 15-g bullet is fired from a rifle. it takes 2.50 * 10^-3s for the bullet to travel the length of the barrel, and it exits the
A barrel shaped like a cylinder is laid on its side and rolled up a ramp. The barrel has a circular base that is
0.9m in
A certain lever system is only 30% efficient. What could make it more efficient?
Make a longer lever that will require less
A farm stand sells cider from two bar ells.The smaller barrel holds 336 L, but it is now 5/6 full. The farmer empties this cider
Assume you have a 50 L barrel full of basketballs and a 50 barrel of tennis balls. If you dump both barrels full of balls into a
Using a lever, a person applies 60 N of force and moves the lever 1 m. This moves a 200 N rock at the other end by 0.2 m. What
A certain lever system is only 30% efficient. What could make it more efficient? (1 point)
Responses Have more than one person
A seesaw has a borad that pivots in the middle, meaning the fulcrum is between the effort and the load. What kind of lever is a
Match the words and their definitions
Load Class 1 Lever Load Arm Effort Arm Effort Class 3 Lever Class 2 Lever Fulcrum