Questions LLC
Login
or
Sign Up
Ask a New Question
Math
Measurement
When measuring DC voltage should the meter be connected?
1 answer
Yes, the meter should be connected to the circuit in order to measure the DC voltage.
You can
ask a new question
or
answer this question
.
Related Questions
Thanks for any help :)
Four 20 ohm resistors are connected in parallel and the combination is connected to a 20V emf device. The
A 6 ohms load is connected to a 119.6volts source through a pair of 0.25 ohms conductors. calculate a) the load current and
Three wire-wound resistors have the following values: 30 ohms, 80 ohms, and 100 ohms. Each resistor has a voltage rating of
two capacitor having capacitance of 10uf and 5uf are connected in series and this combination is connected in parallel with a
The output voltage of an AC generator is given by Δv = (180 V) sin (70πt). The generator is connected across a 13.0-Ω
9. A voltmeter and frequency meter connected across the terminals of a single-phase alternator running on no load gave readings
Solve by setting up the proper equation to describe the facts given and then carrying out the mathematical calculations to solve
A 1 mF, a 2 mF, and a 3 mF capacitor are connected in series, the combination being connected across a 9 volt battery. Which
Resistors of 30 ohms and 60 ohms are connected in parallel and joined in series to a 10 ohm resistor.
The circuit voltage is 180
Three dry cells are connected first in series and then in parallel. The individual cells have voltages of 1.5 V, 1.8 V, and 2.0