Questions LLC
Login
or
Sign Up
Ask a New Question
Math
Measurement
Which meter can measure current without having to make contact with insulated wires?
1 answer
A non-contact current meter, also known as a clamp meter, can measure current without having to make contact with insulated wires.
You can
ask a new question
or
answer this question
.
Related Questions
Two wires support an electricity pole. if the wires make angles of 58°and 67° with the ground and |AB|=21m, calculate the
An electric post is anchored to the ground by two guy wires attached on opposite sides. The guy wires make angles of 35• and
The figure shows a cross section of three parallel wires each carrying a current of 15 A. The currents in wires A and B are into
The figure below shows two current carrying wires and the directions of the currents they carry. The wires carry the following
Two wires support an electricity pole as shown in Fig. 5.17.if the wires make angles of 58 and 67 with the ground and /AB/= 21m
Two parallel wires carry currents I1=100A and I2 (they run in the same direction). The top wire is held in position; the bottom
To secure a 618 meter radio tower against high winds, guy wires are attached to a ring 10 meters from the top of the tower. Each
Three conducting straight wires (though insulated from each other) are each 2 m long. They are electrically connected to each
Two identical thin wires are oriented along the x and y axes.
With current on x plane going North. Current on y plane going
Two parallel straight wires are 1 meter apart. Each wire carries a current of 2 Amperes in the same direction. What is the
