Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Mechanics
Fluid Mechanics
A hydraulic jack has an input piston with an area of 0.5m² and input piston with an area of 2m²,what force is needed to lift a load of 1000N
1 answer
2/ 0.5 = 4
1000 / 4 = 250
You can
ask a new question
or
answer this question
.
Related Questions
A hydraulic lift has 1000 N applied to an input piston that has an area of 30 cm2.
What is the pressure exerted on the input
A hydraulic lift system has an input piston with an area of 0,5 m2 and an output piston whith an area of 2 m2.
What force is
in the hydraulic machine shown, you observe that when the small piston is pulled down 10cm, yhe large piston is raised 1 cm. if
the input and output of hydraulic jack are respectively 1 cm and 4 cm in diameter. A lever with a mechanical advantage of 6 is
the small piston of a hydraulic press has an area of 2.0 cm and the large piston has an area of 16 cm if the small piston has a
A hydraulic jack has an input piston that is 1.2 cm2 in area and an output piston that is 144 cm2 in area. How much input or
In a hydraulic lift, the radii of the pistons are 2.93 cm and 10.1 cm. A car weighing W = 11.0 kN is to be lifted by the force
A hydraulic lift system has an input piston with an area of 0,5 m2 and an output piston whith an area of 2 m2.
What force is
a hydraulic lift is designed for a gain of 100, so that a 10 N force applied at theinput piston will produce a force of 1,000 N
A garage lift has input and output circular pistons with diameters of 1 cm and 45 cm respectively. The lift is used to hold up a