Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
Young modulous of the material is 9.68×10^10N/m^2. A wire of diameter o.95mm is streched by applying certain force. What should be limit of force if in strain is not to exceed 1 in 1000
1 answer
Answer is 68.57N
You can
ask a new question
or
answer this question
.
Related Questions
A wire of 5.0m and diameter 2.0mm,extends by 0.25mm when a force of 50N was stretch it from it's end calculate
a.the stress on
1. A force of 40N at the end of a wire of length 4m and diameter 2mm process and extension of 0.24mm. Calculate; (a) stress on
A round bar 40mm diameter is subjected to an axial pull of 80kN and
reduction in diameter was found to be 0.00775mm. Find
A force of 40N is applied at the end of a wire 4m long and produces an extension of 0.24mm. If the diameter of the wire is
A 50.0-g sample of a conducting material is all that is available. The
resistivity of the material is measured to be 11 x 10-8
What is the resistivity or cylindrical material wire whose 1.0m length has a resistance of 2.0 ohms? the diameter of the wire is
A 4.0-m-long steel wire has a cross-sectional area of 0.050cm2. Its proportional limit has a value of 0.0016 times its Young's
Find the diameter of an 18 m(L) long steel wire that will stretch no more than.009 m
AL when a load stress of 3800 N is hung on
A piece of wire of a diameter 0.70 mm and length 1m has a total resistance of 2 ohms . Calculate the resistivity of the material
a metal wire 1.0 mm in diameter and 2.0 m long hangs vertically with a 5.0 kg mass suspended from it. if the wire stretches 1.2