Questions LLC
Login
or
Sign Up
Ask a New Question
Mathematics
Geometry
Measurements and Calculations
How much wood is needed to completely cover a 4 ft wide ramp that starts 8 ft from a 6 ft tall platform? The ramp will run 10 ft on the incline.d/6 8/10 10f/48=12 ft???
1 answer
10 ft long and 4 ft wide is 40 ft^2
You can
ask a new question
or
answer this question
.
Related Questions
A solid cylinder with a radius of 5.08 cm starts from rest at the top of a 12m long ramp inclined 20.3 degrees above the
The wooden frame of a picture is 20cm long and 16cm wide. If the wood is 1.82cm wide, find the size of the picture.
My working:
a block of mass 2.50 kg rests on a ramp. if the coefficient of static friction between the block and ramp is 0.350, what maximum
A three-ring binder needs to be covered with enough book cover material. The binder measures 27.9 cm wide, 5.1 cm high, and 30.5
Dedrea is making a bike ramp on the sidewalk in front of their house. They place a wood plank on top of blocks to form the ramp.
George bought a decorative cover for his tissue boxes. The cover is 5 in. long, 10 in. wide, and 3 in. deep. What is the volume
How could you increase the mechanical advantage of the ramp below?
a cover the surface of the ramp with carpet b decrease the
A skateboarder starts up a 1.0-m-high, 30∘ ramp at a speed of 7.2 m/s . The skateboard wheels roll without friction. At the
A 600-pound boat sits on a ramp inclined at 30 degrees as shown in the attached image. What force is required to keep the boat
A 2.0 kg wood block is launched up a wooden ramp that is inclined at a 25 ∘ angle. The block's initial speed is 14 m/s . The