 Questions
 physics
refer to a situation where you exert a force F on a crate of mass M, moving it at a speed v a distance d across a floor in a time interval t. The quantity F d/t is?
a.)kinetic energy of the crate
b.)potential energy of the crate
c.)linear momentum of the crate
d.)work you do on the crate
e.)power you supply to the crate
 👍
 👎
 👁
 ℹ️
 🚩
Answer this Question
Related Questions

Physics
A 1000N crate is being pushed across a level floor at a constant speed by a force F of 300N at an angle of 20.0 degrees. (a) What is the coefficient of kinetic friction between the crate and the floor? (b) If the 300N force is instead pulling the block at

phys
A 12kg crate rests on a horizontal surface and a boy pulls on it with a force that is 30 degree below the horizontal. If the coefficient of static friction is 0.40, the minimum magnitude force he needs to start the crate moving is:

physics
A woman holds a 1.9 m long uniform 5.5 kg pole as shown in the figure . her hands are 30 cm apart. Determine the magnitudes of the forces she must exert with each hand. To what position should she move her left hand so that neither hand has to exert a

Physics
A crate of mass m 1 =12.4 kg is pulled by a massless rope up a 36.9 degrees ramp. The rope passes over an ideal pulley and is attached to a hanging crate of mass m 2 =16.3 kg . The crates move 1.40 m, starting from rest. Find the work done by gravity on

physics
1. A boy drags a wooden crate with a mass of 20 kg, a distance of 12 m, across a rough level floor at a constant speed of 1.50 m/s by pulling on the rope tied to the crate with a force of 50 N. The rope makes an angle of 25¡ã with the horizontal. a.What

Physics Really need help!!!
A 3.0mlong rigid beam with a mass 130 kg is supported at each end. An 90 kg student stands 2.0 m from support 1. How much upward force does support 1 exert on the beam? How much upward force does support 2 exert on the beam?

physics multiple choice
A force F is required to push a crate along a rough horizontal floor at a constant speed V with friction present. What force is needed to push this crate along the same floor at a constant speed 3V if friction is the same as before? A. A constant force 3F

physics
If motor M exerts a force of F=(10t2+100)N on the cable, where t is in seconds, determine the velocity of the 25kg crate when t=4s . The coefficients of static and kinetic friction between the crate and the plane are μs=0.3 and 0.25 μk=0.25 . The crate

Physics
A crate of fruit with a mass of 37.5 kg and a specific heat capacity of 3800 J/(kg⋅K) slides 7.60 m down a ramp inclined at an angle of 38.5 degrees below the horizontal. If the crate was at rest at the top of the incline and has a speed of 2.35 m/s at

physics
Two crates, of mass 75 kg and 110 kg, are in contact and at rest on a horizontal surface. A 620N force is exerted on the 75kg crate. If the coefficient of kinetic friction is 0.15, calculate (a) the acceleration of the system, and (b) the force that each
Still need help?
You can ask a new question or browse existing questions.