I need help with a question about chemistry!!!!!!!!!!! I know that motor oil comes in various grades but is it a homogeneous mixture or a compound?
Motor oil, as used for lubrication in cars and other such devices, is a homogeneous mixture. It is mostly oil but it has additives in it. I hope this helps.
 👍
 👎
 👁
 ℹ️
 🚩
Answer this Question
Related Questions

Physics
skier of mass 79 kg is pulled up a slope by a motordriven cable. (a) How much work is required to pull him 80 m up a 30° slope (assumed frictionless) at a constant speed of 3.4 m/s? 1 J (b) What power (expressed in hp) must a motor have to perform this

English
Which is the best summary of the following text? It happens way too often: oil leaking from wells beneath the ocean or tankers spilling their cargo into the waves. One disaster in the Gulf of Mexico, called the Tyler spill, has been leaking hundreds of

Physics
1. A cylindrical disk of wood weighing 45.0N and having a diameter of 30.0 cm floats on a cylinder of oil of density 0.850 g/cm3. The cylinder of oil is 75.0 cm deep and has the same diameter of the wood. (a) What is the gauge pressure at the top of the

physics
Two rockets with the same mass are. Accelerated. Rocket A accelerates twice as fast as Rocket B. Which statement is correct? The motor in rocket A is four times as powerful as the motor and in rocket B The motor in rocket A Is twice as powerful as the

4 Calculus RelatedRates Problems
1. How fast does the radius of a spherical soap bubble change when you blow air into it at the rate of 15 cubic centimeters per second? Our known rate is dV/dt, the change in volume with respect to time, which is 15 cubic centimeters per second. The rate

language arts
Use the paragraph to answer the question. It happens way too often: oil leaking from wells beneath the ocean or tankers spilling their cargo into the waves. One disaster in the Gulf of Mexico, called the Tyler spill, has been leaking hundreds of barrels of

Calculus
An oil storage tank ruptures at time t = 0 and oil leaks from the tank at a rate of r(t) = 105e^−0.02t liters per minute. How much oil leaks out during the first hour? (Round your answer to the nearest liter.) I got 4974.35 and it was incorrect, any

Math
A fuel oil tank is an upright cylinder, buried so that its circular top 12 feet beneath ground level. The tank has a radius of 6 feet and is 18 feet high, although the current oil level is only 13 feet deep. Calculate the work required to pump all of the

Physics
At t = 0 s a flywheel is rotating at 25 rpm. A motor gives it a constant acceleration of 0.8 rad/s2 until it reaches 100 rpm. The motor is then disconnected. How many revolutions are completed at t = 23 s?

physics
2. At time t =0, the current to the dc motor is reversed, resulting in an angular displacement of the motor shaft given by θ = (198 rad/s)t – (24 rad/s2)t2 – (2 rad/s3)t3 a. At what time is the angular velocity of the motor shaft zero? b. Calculate

Fluid Mechanics
The kinematic viscosity of oil of specific gravity .8 is .0005 .This oil is used for lubrication of shaft of diameter .4 m and rotates at 190 rpm. Calculate the power lost in the bearing for a sleeve length of 90mm. The thickness of the oil film is 1.5mm.

Physics
Two rockets with the same mass are. Accelerated. Rocket A accelerates twice as fast as Rocket B. Which statement is correct? The motor in rocket A is four times as powerful as the motor and in rocket B The motor in rocket A Is twice as powerful as the

Algebra
A petroleum company has two different sources of crude oil. The first source provides crude oil that is 35% hydrocarbons, and the second one provides crude oil that is 60% hydrocarbons. In order to obtain 120 gallons of crude oil that is 55% hydrocarbons,

Physics
At t = 0 s a flywheel is rotating at 30 rpm. A motor gives it a constant acceleration of 0.9 rad/s^2 until it reaches 70 rpm. The motor is then disconnected. How many revolutions are completed at t = 20 s? number of revolutions?

Physics
A 2hp motor drives a sanding belt. If the efficiency of the motor is 87% and that of the sanding belt 75% due to slippage, what is the overall efficiency of the system? The answer has to be 65.25%. Can someone please help me to work it out?

chemistry
If 53.62 ml of an oil weighs 48.34 g, what is the specific gravity of the oil?

math
A school has 63 students studying Physics, Chemistry and Biology. 33 study Physics, 25 Chemistry and 26 Biology. 10 study Physics and Chemistry, 9 study Biology and Chemistry while 8 study both Physics and Biology. Equal numbers study all three subjects as

just wondering...
what is harder, chemistry or physics? because i've been struggling all year in chemistry and i'm taking physics next year... i have a solid a in alg.2 though... oh yeah, and i want to be a physical therapist. so if i'm not to good in chemistry can i still

Mathematics, science and so on
Out of 400 students to n the final year in a secondary school,300 are offering biology and 190 are offering chemistry I.How many students are offering both biology and chemistry,if only 70 students are offering neither biology nor chemistry ii.how many

physics
A skier of mass 74 kg is pulled up a slope by a motordriven cable. (a) How much work is required to pull him 90 m up a 30° slope (assumed frictionless) at a constant speed of 3.0 m/s? J (b) What power (expressed in hp) must a motor have to perform this
Still need help?
You can ask a new question or browse existing questions.