what is a fulcrum, the effort and the load? also what is a Class 1 lever, Class 2 lever, and Class 3 lever? plz helpp! thanks:)
 👍
 👎
 👁
 ℹ️
 🚩
Answer this Question
Related Questions

Math (Stats)
What is the difference between class limits and class boundaries? A) Class limits are the numbers that separate classes without forming gaps between them. Class boundaries are the least and greatest numbers that can belong to the class. For integer data,

physics
A simple lever is used to lift a heavy load. When a 60N force pushes one end of the lever down 1.2 m, the load rises 0.2 m. Show that the weight of the load is 360 N.

Agosec Ghana
a machine was used to lift a load of 30N through a distance of 2metres. the effort applied was 10N through a distance of 8metres. calculate the. A) mechanical advantage B) work input of the machine C) work output of the machine D) the efficiency of the

Physics
A boy is pulling a load of 150N with a string inclined at an angle of 30 degrees to the horizontal.If the tension in the string is 105N, calculate the force tending to lift the load off the ground.

physical science
A simple lever is used to lift a heavy load. When a 60N force pushes one end of the lever down 1.2 m, the load rises 0.2 m. Show what the weight of the load is 360N.

stats 101
how do you find the lower class limit,upper class limit, class width, class midpoint, and class boundaries from a set of frequencies data

Science
A spiral spring extends by 5cm under a load of 60N.when the load is replaced by a steel block, the new extension is 7cm. Calculate the weight of the steel block.

physics
A load of 100 lb is hung from the middle of a rope, which is stretched between two rigid walls 30 ft apart. Due to the load, the rope sags 4 feet in the middle. Determine the tension on the rope.

physics
it takes 100 N to pull and object up an inclined plane. the gravitional force on the object is 600 N what is the load force in this case? what is the effort force in this case? what is the mechanical advantage?

physics
A load of 80N extends a spring by 8cm. When the load is replaced by a copper block, the extension produced is 10cm. Calculate the weight of the copper block, assuming that the elastic limit of the spring is not exceeded.

Science
A machine has a velocity of 6 and is 80% efficient.what effort will be needed to lift a load of 300N with the aid of this machine?

physics
A machine with a velocity ratio of 30 moves a load of 3000N when an effort of 200N is applied.the efficiency of the machine is what?

Physics
A 285kg load is lifted 22.0 m vertically with an acceleration a=0.170 g by a single cable. Determine the tension in the cable. (N) Determine the net work done on the load. (J) Determine the work done by the cable on the load. Determine the work done by

physics
Resistors R1, R2, and R3 have resistances of 15.0 Ohms, 9.0 Ohms and 8.0 Ohms respectively. R1 and R2 are connected in series, and their combination is in parallel with R3 to form a load across a 6.0V battery. What is the total resistance of the load?

Geometry
When Ms Shreve randomly selects a student in her class, she has 1/3 probability of selecting a boy. A: If her class has 36 students, how many boys are in her class? B: if there are 11 boys in her class, how many girls are in her class? C: what is the

math
In a local school 34 students are enrolled in a math class, 85 are enrolled in an english class, 58 are enrolled in an art class, and 54 are enrolled in a history class. Construct a pie chart with this data. What is the central angle of the slice

Physics
A crane lifts a 1800kg load of scrap metals to a distance of 15 m in 20 s. how much power is used in delivering the load?

Electro 1
A 6 ohms load is connected to a 119.6volts source through a pair of 0.25 ohms conductors. calculate a) the load current and voltage. b) the voltage drop in the wires.

statistics
A history class has 75 members. If there is a 12% absentee rate per class meeting, find the mean, variance, and atandard deviation of the number of students who will be absent from each class

physics
3. A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 1.00 m, and the distance from the fulcrum to the load is 0.250 m. What is the mechanical advantage of the lever? What is the ideal mechanical advantage
Still need help?
You can ask a new question or browse existing questions.