For what combination of parallel and series resistors will resistors of 25 ohms, 100 ohms, 50 ohms, and 50 ohms have a total resistance of 62.5 ohms?
 👍
 👎
 👁
 ℹ️
 🚩
Answer this Question
Related Questions

Electro 1
Two resistors Ra= 1.95 ohms and Rb = 0.05 ohms are connected in parallel and take a total of 50A. What is the current trough each resistor.
 asked by Tristan

Calculus 1
If two resistors with resistances R1 and R2 are connected in parallel, as in the figure below, then the total resistance R, measured in ohms (Ω), is given by 1/R= 1/R1+ 1/R2. If R1 and R2 are increasing at rates of 0.3 Ω/s and 0.2 Ω/s, respectively, how
 asked by TayB

Physics
Two resistances of 6 ohms and 8 ohms are connected in parallel. This combination is connected in series to another parallel combination of 2 ohms and 5 ohms. If the current in the whole combination is 15 amperes, determine the voltage in each resistor.
 asked by Alyssa

Science
2 cells, each of Emf 2v and internal resistance 0.5ohms are connected in series .they are made to supply current to a combination of three resistors one of the resistance 2ohms is connected in series to a parallel combination of two other resistor each of
 asked by Odeyemi

physics
A battery of three cells in series ,each of e.m.f. 2v and internal resistance 0.5 ohms is connected to a 2 ohm resistor in series with a parallel combination of two 3 ohms resistor . Draw the circuit diagram and calculate: a) the effective external
 asked by major

CIRCUITS
three 20 kilo ohms Resistors R1, R2, and R3 are in Series across an applied voltage of 120 V. What is the voltage drop across each resistor.
 asked by Camille

PreCalc
The total electrical resistance R of two resistors connected in parallel with resistances R1 and R2 is given by 1/R=1/R1+1/R2. One resistor has a resistance of 2.3 ohms. Let x be the resistance of the second resistor. Express the total resistance R as a
 asked by Linda

Physics
1)Four resistors of 10.0 each are connected in parallel. A combination of four resistors of 10.0 each is connected in series along with the parallel arrangement. What is the equivalent resistance of the circuit? A)80.0 B)40.4 C)40.0 D)42.5 I got C 2)A 2.00
 asked by Jon

circuits
If a series RLC circuit has R = 25 ohm, XL = 50 ohms, and XC = 30 ohms, what will be the total impedance?
 asked by Adam

science past year
1.1. A resitance of 1.5ohm is connected in parallel with a resistance of 3 ohm. This combination is connected in series with a resistance of unknown resistance of value R. The circuit is then connected acress a 10 V supply. Calculate: 1.1.1. The value of
 asked by kamil

Physics
Three resistors R1=5ohms, R2=3ohms, and R3=4ohms are connected in series to each other. A voltmeter connected in parallel to resistor R2 measures voltage of 6V. What is the net voltage in the circuit?
 asked by Maballs

Physics
Thanks for any help :) Four 20 ohm resistors are connected in parallel and the combination is connected to a 20V emf device. The current is: A) 0.25A B) 1.0 A C) 4.0 A D) 5.0 A E) 100 E Parallel circuits: I know that the voltage is 20V and the Resistance
 asked by susane

Probability and Statistics
A package contains 12 resistors, 3 of which are defective. If four are selected, find the probability of getting the following. No defective resistors One defective resistors 3 defective resistors
 asked by Brad

electrical year 2
how do i answer this. A series RL circuit contains two resistors and two inductors.the resistors are 33 ohms and 47 ohms the inductors have inductive reactances of 60 ohms and 30 ohms. the applied voltage is 120 v. what is the voltage drop on the 33 ohm
 asked by Dan

Electro 1
A 6 ohms load is connected to a 119.6volts source through a pair of 0.25 ohms conductors. calculate a) the load current and voltage. b) the voltage drop in the wires.
 asked by Tristan

physics (please check)
A total resistance of 3 ohms is to be producd by combining an unknown resistor R with a 12 ohm resistor. What is the value of R and how is it connected to the 12 ohm resistor a) 4.0 ohm parallel b) 4.0 ohm in series c) 2.4 ohm in parallel d) 2.4 in series
 asked by susane

e
If two resistors of 1000 ohms each are connected in parallel, what is the total resistance of the two?
 asked by h

physics
A 15.0 Ohms resistor is connected in series to a 120V generator and two 10.0 Ohms resistors that are connected in parallel to each other. What is the total resistance of the load? What is the magnitude of the circuit current? What is the current in one
 asked by Rony

Series RL circuits
A series RL circuit contains two resistors and two inductors. The resistors are 43 ? and 54 ?. The inductors have inductive reactances of 70 ? and 40 ?. The total impedance is _____.
 asked by Luis

physics
Resistors R1, R2, and R3 have resistances of 15.0 Ohms, 9.0 Ohms and 8.0 Ohms respectively. R1 and R2 are connected in series, and their combination is in parallel with R3 to form a load across a 6.0V battery. What is the total resistance of the load?
 asked by Rony
Still need help?
You can ask a new question or browse existing questions.