2. If a pump discharges 284 liters per minute of water whose density is 985 kg/m3
. Find (a) mass
flow rate in kg/min; (b) the total time required to fill a vertical cylindrical tank 3.05 m in
diameter, and 305 m high. Note: m = Q x ρ, where m= mass, Q=volume flow rate, ρ= density.
Volume of a cylinder is (π/4)(D2
)(h).
 👍
 👎
 👁
 ℹ️
 🚩
Answer this Question
Related Questions

calculus2
A tank is full of water. Find the work required to pump the water out of the spout. (Use 9.8 m/s^2 for g. Use 1000 kg/m^3 as the density of water. Assume r = 9 m and h = 3 m.) The tank is a spherical shape with r as the radius(9m). On top of the tank is a

algebra
At a factory workers are draining a large vat containing water. The water is being drained at a constant rate. The table below shows the amount of water in the vat after different amounts of time. Time (minutes) 15 20 25 30 Water (liters) 620 560 500 440

math
Suppose water flows from a shower at a rate of 0.32 cubic feet per minute. Do you use more water by taking a 12minute shower or by filling a bathtub with 0.4 cubic yards of water, and by how much?

thermodynamics
if a pump discharges 75 gpm of water whose specific weight is 61.5 lb/ft^3(g=31.95fps^2). find a) the mass flow rate in lb/min, and b) and total time required to fill a vertical cylinder tank 10ft in diameter and 12ft high.

Chemistry
25.00 mL of heavy water (D2O where D is a hydrogen with a neutron in its nucleus) at 20 degrees C was pipetted into a 37.234 g beaker. The final mass of the beaker was 64.859 9 a what is the density of heavy water at 20 degrees C bThe density of normal

physics  another thermo problem
A bicycle pump is a cylinder 20 cm long and 3.0 cm in diameter. The pump contains air at 25.0 C and 1.0 atm. If the outlet at the base of the pump is blocked and the handle is pushed in very quickly, compressing the air to half its original volume, how hot

Mathematics
15 liters of water is poured from container A to Container B and 10 liters of water is poured from container A to container C. If C had 20 liters of water less than A, how many more liters of water does C have than A? A. 10L C. 20L B. 15L D. 25L What

Physics
A density bottle weighs 70g when filled with water and 94g when filled with liquid A. Find the density of liquid A given that density of water is 1000kg/m³

Algebra
Q work crew has two pumps, one new and one old. The new pump can fill a tank in 5 hours. The ols pump can fill the same tank in 7 hours. a. How much of a tank can be filled in 1 hour with the new pump? with the old pump? b.Write an expression for the

Calculus (Definite Integrals  Work)
Recall that work is defined to be force times distance, and that the weight (force) of a liquid is equal to its volume times its density. A fish tank has a rectangular base of width 2 feet and length 6 feet and sides of height 5 feet. If the tank is filled

Physics
A house with its own well has a pump in the basement with an output pipe of inner radius 6.4 mm. Assume that the pump can maintain a gauge pressure of 420 kPa in the output pipe. A showerhead on the second floor (7.5 m above the pump's output pipe) has 38

Physics
2. A pool has an area A = 50 m2 and depth h = 2.5 m. The pool is filled with water to the maximum height. An electrical pump is used to empty the pool. There are two pipes coming out the pump: one is submerged into water has a radius r1 = 4 cm the other

calculus
A tank is full of water. Find the work required to pump the water out of the spout. Use the fact that water weighs 62.5 lb/ft3. (Assume r = 4 ft, R = 8 ft, and h = 15 ft.)

calculus
A tank is full of water. Find the work required to pump the water out of the spout. Use the fact that water weighs 62.5 lb/ft3. (Assume a = 7 ft, b = 12 ft, and c = 14 ft.)

Calculus 2
Consider a trough with triangular ends where the tank is 10 feet long, top is 5 feet wide, and the tank is 4 feet deep. Say that the trough is full to within 1 foot of the top with water of weight density 62.4 pounds/ft^3, and pump is used to empty the

Calculus
A tank is full of water. Find the work required to pump the water out of the spout. Use the fact that water weighs 62.5 lb/ft3. (Assume a = 8 ft, b = 14 ft, and c = 15 ft.)

CHEM AB HELP ASAP
I have a pre lab questions that are due in a few hours and I need help. Theres several questions In the titration of 25.00 ml of a water sample, it took 20.590 ml of 4.995x103 M EDTA solution to reach the endpoint. The total hardness is due to one or a

thermodynamics
If a pump discharges 284 liters/min of water whose density is 985 kg/m3, find (a) the mass flow rate in kg /min, b) the total time to fill a cylindrical tank 3.05 m. in diameter and 3.05 m high.

Physics
A pump is required to lift a mass of 750kg of water per minute from a well of depth 13.2m and eject it with a speed of 17.4m/s. A) How much work is done per minute in lifting the water? B) How much in giving the water the kinetic energy it has when

calculus
A circular swimming pool has a diameter of 20 meters, the sides are 3 meters high, and the depth of the water is 2.5 meters. The acceleration due to gravity is 9.8 m/s2 and the density of water is 1000 kg/m3. How much work is required to: (a) pump all of
Still need help?
You can ask a new question or browse existing questions.